1050 aluminium amplexus
Specifications
Typical Specification of Aluminium tube
| Alloy Nec. | Ingenium | recta Tube | LWC | ||
| OD(mm) | WT(mm) | OD(mm) | WT | ||
| 1060(L2) | R(H112) | 6~30 | 0.6~3 | 4~22 | 0.2~2 |
| M(O) | 6~30 | 0.6~3 | 4~22 | 0.2~2 | |
| H 14 | 6~30 | 0.6~3 | 4~22 | 0.2~2 | |
| 3A21 3003 3103 (LF21) | M(O) | 6~30 | 0.6~3 | 4~22 | 0.2~2 |
| H12 | 6~30 | 0.6~3 | 4~22 | 0.2~2 | |
| H14 | 6~30 | 0.6~3 | 4~22 | 0.2~2 | |
| H18 | 6~30 | 0.6~3 | 4~22 | 0.2~2 | |
| 6063 (LD31) | M(O) | 6~30 | 0.6~3 | 4~22 | 0.5~2 |
| T4 | 6~30 | 0.6~3 | 4~22 | 0.5~2 | |
| T6 | 6~30 | 0.6~3 | 4~22 | 0.5~2 | |
Specification of Interior sulcus Aluminium tube (Size can be customized)
| Specification(mm) | Muri crassitudo (mm) | Altitudo sulcata (mm) | Helical Anglus(°) |
| 7 | 0.4-0.5 | 0.05-0.18 | 18 |
| 7.94 | 0.4-0.5 | 0.05-0.18 | 18 |
| 9.52 | 0.45-0.55 | 0.05-0.18 | 18 |
Mechanica proprietatibus interioris Aluminii sulcata tube
| Materia | Tensile | Prolongatio Rate | Expanding Rate |
| 3003 | 130MPA | 35 | 40 |
Specification of Package Coil
| OD | 6.35 | 7.94 | 9.52 | 12.7 | 15.88 | 19.05 |
| Murum crassitudine | 0.7-1.0 | 0.8-1,2 | 0.8-1.2 | 1-1.5 | 1-1.5 | 1-1.5 |
quanlity spondeum
1) Superficies specie: superficies plana munda non totum, scabere, oleum sordidum vel oxidatio.
2) aciei: concinnum aciei non lappas.
3) Qualitas finis: inspicientia prima producta rate qualificata est 98%. Lorem satisfactio per 95%. Materia: A1050, A1060, A1070, A3003, et sic porro
| A1050 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | alii |
| 99.5~100 | 0~0.25 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.40 | 0~0.03 |
| A1060 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | alii |
| 99.6-100 | 0~0.25 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.03 | 0~0.03 | / | 0~0.35 | |
| A1070 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | alii |
| 99.7~100 | 0~0.2 | 0~0.04 | 0~0.03 | 0~0.04 | 0~0.03 | 0~0.03 | 0~0.05 | 0~0.25 | |
| A3003 Aluminium Chemical Composition | |||||||
| Al | Si | Cu | Zn | Mn | Fe | Alii Single | |
| alii | 0~0.6 | 0.05~0.20 | 0~0.1 | 1.0~1.5 | 0~0.70 | 0~0.05 | |
| Alloy | Ingenium | Specification | |||
| Crassitudo (mm) | Diameter(mm) | Distrahentes fortitudo | duritia | ||
| 7075 7005(tube) | T5, T6, T9 | >0.5 | 5.0-80 | >310 Mpa | >140 |
| 6061 6063 (profiles) | T5, T6 | >1.6 | 10-180 | >572 Mpa | HB90-110 |
| Longitudo: < 6Meter | |||||
| TEMPER | CRASSITUDO(mm) | DISTRAHENTES FORTITUDO | PROLATIO% | Standard |
| T5 | 0.4-5 | 60-100 | ≥ 20 | GB/T3190-1996 |
| T6 | 0.5-6 | 70-120 | ≥ 4 | |
| T9 | 0.5-6 | 85-120 | ≥ 2 |
Aluminium product
Epistulam tuam hic scribe et mitte nobis
